Apex Radon Defense Before & After Photos

ARD was brought in to reduce radon levels in a home on a finished basement and 2 sump pits.  The existing pumps needed to be modified to enable the sump lids to be sealed before we could begin.  We scheduled the install to happen just after plumber modified sump pumps so homeowner could have a quick turnaround time.  We put the system in and it reduced the radon flawlessly!

WE installed a sub slab depressurization system on a new construction slab home with radon levels at 22pCi/L.  We were able to minimize the visibility of the interior piping by routing it through a closet and out of the way of daily life. Client was thrilled when the post mitigation results came back at 0.2pCi/L, as low as you can possible reduce radon levels!

Client called us to lower the radon in a slab home that was reading at 12.  ARD installed a Active Slab Depressurization system and lowered the levels to below 2.0.  Client was very happy to have the radon brought down to safer levels in their home!

Our client reached out with concerns about high radon levels in their home and wanted a safe, effective solution. We installed a sub-slab radon mitigation system, carefully hiding the fan under the deck and routing the piping over the eaves. This setup not only reduced radon levels significantly but also kept the system discreet making the home safer without affecting its appearance. Another happy client!

We were contacted by a client concerned about elevated radon levels in their home. After a thorough on-site assessment, our team designed and installed a sub-slab mitigation system in a small corner of the utility room. Despite the limited space, we successfully implemented the system and achieved a significant reduction in radon levels.